Filter
Top Products
Chapter 6 Settings Menu
> 6.8 Others
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
607
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
3 Click the [OK] button.
→ Displays the [Set Date and Time (Setting)] screen. After the process is successfully
completed, the [Set Date and Time (Setting Result)] screen appears.
- When NTP Service is [Enable], but not input.
- When NTP Service is [Enable] and the entered values are not
alphanumeric characters, or out of range.
- When the NTP Service is [Enable] and the "LAN Port" is
[USER], and the IP address of the NTP server and the
broadcast address for the USER port are the same.
- When the NTP Service is [Enable] and the "LAN Port" is
[REMCS], and the IP address of the NTP server and the
broadcast address for the REMCS port are the same.
- When the NTP Service is [Enable], and the IP address of the
NTP server and the local host address are the same.
- When the NTP Service is [Enable], and the IP address of the
NTP server are not Class A, B, or C.
• Multiple NTP servers cannot be specified.
• If a NTP server is used:
- the time will be synchronized every 3 hours.
- the time correction method is [step: correct immediately].
• An SNTP server may be used instead of the NTP server.