Filter
Top Products
1001
Description Use the peer public-as-only command to not keep private AS numbers in BGP
updates sent to a peer/peer group.
Use the
undo peer public-as-only command to keep private AS numbers in
BGP updates sent to a peer/peer group.
By default, BGP updates carry private AS numbers.
The command does not take effect if the BGP update has both public and private
AS numbers. The range of private AS number is from 64512 to 65535.
Examples # In BGP view, carry no private AS number in BGP updates sent to the peer test.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer test public-as-only
# In BGP-VPN instance view, carry no private AS number in BGP updates sent to
the peer test (the VPN has been created).
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-vpn1] peer test public-as-only
peer reflect-client (BGP/BGP-VPN instance view)
Syntax peer { group-name | ip-address } reflect-client
undo peer { group-name | ip-address } reflect-client
View BGP view
Parameters group-name: Name of a peer group, a string of 1 to 47 characters.
ip-address: IP address of a peer.
Description Use the
peer reflect-client command to configure the router as a router
reflector and specify a peer/peer group as a client.
Use the
undo peer reflect-client command to remove the configuration.
By default, neither route reflector nor client is configured.
Related commands: reflect between-clients (BGP view) and reflector cluster-id (BGP view).
Examples # In BGP view, configure the local device as a router reflector and specify the IBGP
peer group test as a client.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer test reflect-client