Filter
Top Products
1600 CHAPTER 96: MPLS TE CONFIGURATION COMMANDS
LSA []
------------------------------------------------
LSA Type : Opq-Area
Opaque Type : 1
Opaque ID :
Advertising Router ID : xxx.xxx.xxx.xxx
LSA Age :
Length :
LSA Options :
LS Seq Number :
CheckSum :
Link Type :Point to Point / Point to Multi Point /MultiAccess
Link ID :
Local Interface Address : xxx.xxx.xxx.xxx
Remote Interface Address : xxx.xxx.xxx.xxx
TE Metric :
Maximum Bandwidth : bytes/sec
Maximum Reservable BW : bytes/sec
Admin Group :
Global Pool:
Unreserved BW [ 0] = 0 bytes/sec
Unreserved BW [ 1] = 0 bytes/sec
Unreserved BW [ 2] = 0 bytes/sec
Unreserved BW [ 3] = 0 bytes/sec
Unreserved BW [ 4] = 0 bytes/sec
Unreserved BW [ 5] = 0 bytes/sec
Unreserved BW [ 6] = 0 bytes/sec
Unreserved BW [ 7] = 0 bytes/sec
Sub Pool :
Unreserved BW [ 0] = 0 bytes/sec
Unreserved BW [ 1] = 0 bytes/sec
Unreserved BW [ 2] = 0 bytes/sec
Unreserved BW [ 3] = 0 bytes/sec
Unreserved BW [ 4] = 0 bytes/sec
Unreserved BW [ 5] = 0 bytes/sec
Unreserved BW [ 6] = 0 bytes/sec
Unreserved BW [ 7] = 0 bytes/sec
Bandwidth Constraints:
BC [ 0] = bytes/sec BC [ 1] = bytes/sec
Local OverBooking Multipliers:
LOM[0]= 1 LOM[1]= 1
Table 418 Description on the fields of the display ospf mpls-te command
Field Description
Area ID TE enabled OSPF area ID.
LSA Type LSA type which must be Opd-Area, carried in the Opaque
LSA header
Opaque Type 1 for TE, carried in the header of Opaque LSA
Opaque ID Opaque ID, carried in the header of Opaque LSA
Advertising Router ID Router ID of the node where the LSA was generated
LSA age LSA age, carried in the header of Opaque LSA
Length LSA length, carried in the header of Opaque LSA
LSA Options LSA options, carried in the header of Opaque LSA
LS Seq Number LSA sequence number, carried in the header of Opaque LSA
Checksum LSA checksum, carried in the header of Opaque LSA
Link Type Link type: point to point, point to multipoint, or multiAccess
Link ID Link ID