Filter
Top Products
1869
display dar protocol-statistic
Syntax display dar protocol-statistic [ protocol protocol-name | top top-number | all ]
[ interface interface-type interface-number ] [ direction { in | out }]
View Any view
Parameters protocol protocol-name: Displays specified protocol, in the same range with the
protocol-name defined in the if-match protocol command.
top top-number: Displays the newest protocols of the traffic in top-number, in the
range 1 to 16.
all: Displays all protocol packets; it defaults not to display the statistics packets
and the protocol packets in 0 byte.
interface-type interface-number: Specifies an interface by its type and number.
direction: Specifies the direction to display traffic. By default, it is bi-directional.
in: Displays the traffic on the inbound direction.
out: Displays the traffic on the outbound direction.
Description Use the
display dar protocol-statistic command to display DAR packet
statistics information.
Examples # Display statistics information about all protocol packets.
<Sysname> display dar protocol-statistic
Interface: Ethernet0/0
Port In/Out Packet Count Byte Count Bit Rate Max Bit Rate
in 5 min in 5 min
(bps) (bps)
-------- ------ ------------- --------------- ------------ -----------
ftp IN 33 1034 23 44
OUT 10 650 0 0
http IN 24 948 11 20
bgp IN 1 72 10 12
Total IN 58 2054 44 76
OUT 10 650 0 0
Interface: Ethernet2/0
Port In/Out Packet Count Byte Count Bit Rate Max Bit Rate
in 5 min in 5 min
(bps) (bps)
-------- ------ ------------- --------------- ------------ -----------
bgp OUT 23 1480 110 112
Total OUT 23 1480 110 112
Table 497 Description on the fields of the display dar protocol-statistic command
Field Description
Port Protocol name
In/Out Direction in which the packet is transmitted
(inbound/outbound)