Filter
Top Products
1422 CHAPTER 90: PIM CONFIGURATION COMMANDS
reset pim control-message counters
Syntax reset pim [ vpn-instance vpn-instance-name | all-instance ] control-message
counters [ interface interface-type interface-number ]
View User view
Parameter vpn-instance-name: VPN instance name, a case sensitive string of up to 31
characters.
all-instance: Specifies all VPN instances.
interface interface-type interface-number: Specifies to reset the PIM control
message counter on a particular interface. If no interface is specified, this
command will clear the statistics information of PIM control messages on all
interfaces.
Description Use the
reset pim control-message counters command to reset PIM control
message counters.
Example # Reset PIM control message counters on all interfaces in the public instance.
<Sysname> reset pim control-message counters
source-lifetime (PIM view)
Syntax source-lifetime interval
undo source-lifetime
View Public instance PIM view, VPN instance PIM view
Parameter interval: Multicast source lifetime in seconds, with an effective range of 1 to
65,535.
Description Use the
source-lifetime command to configure the multicast source lifetime.
Use the undo source-lifetime command to restore the default setting.
By default, the lifetime of a multicast source is 210 seconds.
Related command: state-refresh-interval (PIM view).
Example # Set the multicast source lifetime to 200 seconds in the public instance.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] source-lifetime 200