Filter
Top Products
2724 CHAPTER 180: VOICE RADIUS CONFIGURATION COMMANDS
authentication
Syntax authentication
undo authentication
View Access number view
Parameter None
Description Use the
authentication command to enable the RADIUS authentication function
for users who dial some access number.
Use the
undo authentication command to disable the RADIUS authentication
function.
By default, the RADIUS authentication function is disabled for users who dial
access numbers.
For each access number, you can specify the RADIUS server to perform
authentication for users who dial it. If the authentication function is enabled for
users who dial some access number, only users who pass authentication can be
authorized to make IP calls. If the authentication function is disabled, users who
dial the access number can directly make IP calls no matter whether they are legal.
The authentication function must be enabled before the authorization function.
When the authentication function is disabled, the authorization function will
automatically be disabled, and meanwhile, the authorization and undo
authorization commands will be unavailable.
Related command: gw-access-number and authorization.
Example # Enable the authentication function for users who dial the access number 17909.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] gw-access-number 17909
[Sysname-voice-dial-anum17909] authentication
# Disable the authentication function for users who dial the access number 17909.
[Sysname-voice-dial-anum17909] undo authentication
authentication-did
Syntax authentication-did
undo authentication-did