Filter
Top Products
967
group-name: Name of a peer group to be displayed, a string of 1 to 47 characters.
log-info: Displays the log information of the specified peer.
verbose: Displays the detailed information of the peer/peer group.
Description Use the
display bgp peer command to display peer/peer group information.
Examples # Display the detailed information of the peer 10.110.25.20.
<Sysname> display bgp peer 10.110.25.20 verbose
Peer: 10.110.25.20 Local: 2.2.2.2
Type: EBGP link
BGP version 4, remote router ID 1.1.1.1
BGP current state: Established, Up for 00h01m51s
BGP current event: RecvKeepalive
BGP last state: OpenConfirm
Port: Local - 1029 Remote - 179
Configured: Active Hold Time: 180 sec Keepalive Time: 60 sec
Received : Active Hold Time: 180 sec
Negotiated: Active Hold Time: 180 sec
Peer optional capabilities:
Peer support bgp multi-protocol extended
Peer support bgp route refresh capability
Address family IPv4 Unicast: advertised and received
Received: Total 5 messages, Update messages 1
Sent: Total 4 messages, Update messages 0
Maximum allowed prefix number: 4294967295
Threshold: 75%
Minimum time between advertisement runs is 30 seconds
Optional capabilities:
Route refresh capability has been enabled
Peer Preferred Value: 0
Routing policy configured:
No routing policy is configured
Table 218 Description on the fields of the display bgp peer command
Field Description
Peer IP address of the peer
Local Local router ID
Type Peer type: Internal as IBGP peers and External as EBGP
peers.
BGP version BGP protocol version
remote router ID Router ID of the peer
BGP current state Current state of the peer
BGP current event Current event of the peer
BGP last state Last state of the peer
Port Port number of local router and its peer
Configured: Active Hold Time Local holdtime interval
Keepalive Time Local keepalive interval
Received: Active Hold Time Remote holdtime interval
Negotiated: Active Hold Time Negotiated holdtime interval