Filter
Top Products
943
View Any view
Parameters None
Description Use the
display ipv6 routing-table command to display brief routing table
information, including destination IP address and prefix, protocol type, priority,
metric, next hop and outbound interface.
The command displays only active routes, namely, the brief information about the
current optimal routes.
Examples # Display brief routing table information
<Sysname> display ipv6 routing-table
Routing Table :
Destinations : 1 Routes : 1
Destination : ::1/128 Protocol : Direct
NextHop : ::1 Preference : 0
Interface : InLoop0 Cost : 0
display ipv6 routing-table acl
Syntax display ipv6 routing-table acl acl6-number [ verbose ]
View Any view
Parameters acl6-number: Basic IPv6 ACL number, in the range 2000 to 2999.
Verbose: Displays both active and inactive verbose routing information permitted
by the ACL. Without this keyword, only brief active routing information is
displayed.
Description Use the
display ipv6 routing-table acl command to display routing
information permitted by the IPv6 ACL.
If the specified IPv6 ACL is not available, all routing information is displayed.
Examples # Display brief routing information permitted by ACL 2000.
<Sysname> display ipv6 routing-table acl 2000
Routes Matched by Access list 2000 :
Table 209 Description on the fields of the display ipv6 routing-table command
Field Description
Destination Destination IPv6 address
NextHop Next hop
Preference Routing preference
Interface Outbound interface
Protocol Routing protocol of the route
Cost Routing cost