Filter
Top Products
1579
display mpls rsvp-te request
Syntax display mpls rsvp-te request [ interface interface-type interface-number ] [ | { begin |
include | exclude } regular-expression ]
View Any view
Parameter interface interface-type interface-number: Specifies an interface by its type and
number.
|: Filters output by regular expression.
begin: Displays information beginning with a defined regular expression.
include: Displays information that includes a defined regular expression.
exclude: Displays information that excludes a defined regular expression.
regular-expression: Regular expression, a string of 1 to 80 characters without
spaces.
Description Use the
display mpls rsvp-te request command to display information about
RSVP-TE requests on the specified or all interfaces.
Example # Display information about RSVP-TE requests on all interfaces.
<Sysname> display mpls rsvp-te request
Interface Ethernet1/0:
Tunnel Dest: 2.2.2.2 Ingress LSR ID: 3.3.3.3
Local LSP ID: 4 Session Tunnel ID: 4
NextHopAddr: 80.4.1.1
SessionFlag: SE Style desired.
Token bucket rate: 0.00 Token bucket size: 1000.00
Out Interface: Ethernet1/1
Path message Path message sent from the interface to the next hop at
X.X.X.X
Resource Available when the RSVP flag is configured
Graceful Restart State State of GR: stale or normal. Displayed as --- when not
supported by the device.
Table 398 Description on the fields of display mpls rsvp-te psb content
Field Description
Table 399 Description on the fields of the display mpls rsvp-te request command
Field Description
Interface Ethernet1/0 RSVP-TE enabled Ethernet interface
Tunnel Dest Tunnel destination, in the format of X.X.X.X
Ingress LSR ID Ingress LSR ID, in the format of X.X.X.X
Local LSP ID Local LSP ID
Session Tunnel ID Session tunnel ID