Filter
Top Products
2376 CHAPTER 158: FTP CLIENT CONFIGURATION COMMANDS
Examples # The device serves as the FTP client. Enable FTP client debugging and use the
active mode to download file sample.file from the current directory of the FTP
server.
<Sysname> terminal monitor
<Sysname> terminal debugging
<Sysname> ftp 192.168.1.46
Trying 192.168.1.46 ...
Press CTRL+K to abort
Connected to 192.168.1.46.
220 FTP service ready.
User(192.168.1.46:(none)):ftp
331 Password required for ftp.
Password:
230 User logged in.
[ftp]undo passive
[ftp] debugging
[ftp] get sample.file
---> PORT 192,168,1,44,4,21
200 Port command okay.
The parsed reply is 200
---> RETR sample.file
150 Opening ASCII mode data connection for sample.file.
The parsed reply is 150
FTPC: File transfer started with the signal light turned on.
FTPC: File transfer completed with the signal light turned off.
.226 Transfer complete.
FTP: 3304 byte(s) received in 4.889 second(s), 675.00 byte(s)/sec.
[ftp]
delete
Syntax delete remotefile
View FTP client view
Parameter remotefile: File name.
Table 620 Description on the fields of the debugging command
Field Description
---> PORT Give an FTP order, with data port numbers
being...
The parsed reply is The received reply code, which is defined in
RFC 959.
---> RETR Download the file
FTPC: File transfer started with the signal light
turned on.
File transfer starts, and the signal light is
turned on.
FTPC: File transfer completed with the signal
light turned off.
File transfer is completed, and the signal light
is turned off.