Filter
Top Products
2341
You can use the display snmp-agent mib-view command to view the access
right of the default view. Also, you can use the undo snmp-agent mib-view
command to remove the default view, after that, however, you cannot read or
write all MIB nodes on Agent.
Related command: snmp-agent group.
Example # Create a MIB view mibtest, which includes all objects of the subtree mib2.
<Sysname> system-view
[Sysname] snmp-agent mib-view included mibtest 1.3.6.1
snmp-agent packet max-size
Syntax snmp-agent packet max-size byte-count
undo snmp-agent packet max-size
View System view
Parameter byte-count: Maximum number of bytes of an SNMP packet that can be received or
sent by an agent, in the range 484 to 17,940. The default value is 1,500 bytes.
Description Use the
snmp-agent packet max-size command to configure the maximum
number of bytes in an SNMP packet that can be received or sent by an agent.
Use the
undo snmp-agent packet max-size command to restore the default
packet size.
Example # Configure the maximum number of bytes that can be received or sent by an
SNMP agent to 1,042 bytes.
<Sysname> system-view
[Sysname] snmp-agent packet max-size 1042
snmp-agent sys-info
Syntax snmp-agent sys-info { contact sys-contact | location sys-location | version { all | { v1
| v2c | v3 }* }}
undo snmp-agent sys-info { contact | location | version { all | { v1 | v2c | v3 }* }}
View System view
Parameter sys-contact: A string of 1 to 200 characters that describes the contact information
for system maintenance.
sys-location: A string of 1 to 200 characters that describes the location of the
device.