Filter
Top Products
378 CHAPTER 22: FRAME RELAY CONFIGURATION COMMANDS
display fr pvc-info
Syntax display fr pvc-info [ interface interface-type { interface-number |
interface-number.subnumber }] [dlci-number ]
View Any view
Parameter interface interface-type { interface-number | interface-number.subnumber }:
Specifies an interface by its type and number. It can be a main or subinterface. The
interface-type argument is an interface type. The interface-number argument is a
main interface number. The subnumber argument is a subinterface number, in the
range 0 to 1023.
dlci-number: virtual circuit number of frame relay interface. It ranges from 16 to
1007.
Description Use the
display fr pvc-info command to display state information on FR PVCs
and statistics about data transmitted and received on them.
If the command is performed with no interface or DLCI specified, the displayed
information covers all PVCs; if with an interface (a main interface or subinterface)
specified, the displayed information covers only the PVCs on the interface; and if
with a DLCI specified, the displayed information covers only the specified PVC.
Related command: fr dlci.
Example # Display the frame relay PVC table.
<Sysname> display fr pvc-info
PVC statistics for interface Serial2/0 (DTE, physical UP)
DLCI = 100, USAGE = UNUSED (0000), Serial2/0
create time = 2000/04/01 23:55:39, status = active
in BECN = 0, in FECN = 0
in packets = 0, in bytes = 0
out packets = 0, out bytes = 0
DLCI = 102, USAGE = LOCAL (0010), INTERFACE = Serial2/0.1
create time = 2000/04/01 23:56:14, status = active
in BECN = 0, in FECN = 0
in packets = 0, in bytes = 0
out packets = 0, out bytes = 0
Table 46 Description on the fields of the display fr map-info pppofr command
Field Description
Fr Interface Frame relay interface name
DLCI DLCI number
Fr State Frame relay state
PPP Interface Name of the associated PPP virtual template interface
PPP Phase Phase of the PPP session