Filter
Top Products
2316 CHAPTER 153: RMON CONFIGURATION COMMANDS
display rmon event
Syntax display rmon event [ entry-number ]
View Any view
Parameter entry-number: Index of an RMON event entry, in the range 1 to 65535. If no entry
is specified, the configuration of all event entries is displayed.
Description Use the
display rmon event command to display the configuration of the
specified or all RMON event entries.
Displayed information includes event index, event owner, event description, action
triggered by the event (such as sending log or trap messages), and last time the
event occurred (the elapsed time since system initialization/startup) in seconds.
n
If the alarm entry corresponding the configuration command is invalid (that is, the
entry in the display rmon event command is invalid), the configuration
command is not displayed in the configuration file, that is, the configuration
command is not in the configuration information displayed by the display
current-configuration command.
Related command: rmon event.
Example # Display the configuration of RMON event table.
<Sysname> display rmon event
Event table 1 owned by user1 is VALID.
Description: null.
Will cause log-trap when triggered, last triggered at 0days 00h:02m:27s.
When startup
enables
How can an alarm be triggered
Latest value The last sampled value
Table 608 Description on the fields of the display rmon alarm command
Field Description
Table 609 Description on the fields of the display rmon event command
Field Description
Event table Event entry number
owned by Owner of the entry
VALID Status of the entry identified by the index (VALID means
the entry is valid, and UNDERCREATION means invalid.
You can use the display rmon command to view the
invalid entry and with the display
current-configuration and display this commands you
cannot view the corresponding rmon commands.)
Description Description for the event
cause log-trap when triggered The event will trigger logging and trapping.
last triggered at Last time the event was triggered