Filter
Top Products
1951
Description Use the accounting-on enable send command to set the maximum number of
accounting-on packet retransmission attempts.
Use the
undo accounting-on enable send command to restore the default.
By default, the maximum number of accounting-on packet retransmission
attempts is 5.
Note that:
■ This command is applicable to centralized devices only.
■ Execution of this command does not affect the results of other accounting-on
related commands such as accounting-on enable. That is, execution of the
undo accounting-on enable interval command will not disable the
accounting-on function.
■ The maximum number of accounting-on packet retransmission attempts
configured with this command takes effect immediately.
Related command: radius scheme, accounting-on enable.
Example # In RADIUS scheme rd, set the maximum number of accounting-on packet
retransmission attempts to 10.
<Sysname> system-view
[Sysname] radius scheme rd
[Sysname-radius-rd] accounting-on enable send 10
data-flow-format (RADIUS scheme view)
Syntax data-flow-format { data { byte | giga-byte | kilo-byte | mega-byte } | packet
{ giga-packet | kilo-packet | mega-packet | one-packet }}*
undo data-flow-format { data | packet }
View RADIUS scheme view
Parameter data: Specifies the unit for data flows, which can be byte, kilobyte, megabyte, or
gigabyte.
packet: Specifies the unit for data packets, which can be one-packet, kilo-packet,
mega-packet, or giga-packet.
Description Use the
data-flow-format command to specify the unit for data flows or
packets to be sent to a RADIUS server.
Use the
undo data-flow-format command to restore the default.
By default, the unit for data flows is byte and that for data packets is
one-packet.