Filter
Top Products
1093
Table 245 Description on the fields of the debugging isis checksum-error command
Field Description
For all processes of the VPN instance
vpn-instance-name , IS-IS Checksum errors
debugging is on
The LSP checksum error debugging is enabled
for all the IS-IS processes of the VPN instance.
For the process process-id, IS-IS Checksum
errors debugging is on
The LSP checksum error debugging is enabled
for the IS-IS process.
Table 246 Description on the fields of the debugging isis circuit-information command
Field Description
% circuitName not enabled for Ipv4 IPv4 is not enabled on the interface.
circuitName: Interface name
% circuitName not enabled for Ipv6 IPv6 is not enabled on the interface.
circuitName: Interface name
% circuitName not enabled IS-IS is not enabled on the interface.
circuitName: Interface name
Interface MTU should not be too small(< 131) Interface MTU cannot be smaller than 131.
The IP is set to UP for IS-IS on interface IP of the IS-IS enabled interface is up.
The IP is set to DOWN for IS-IS on interface IP of the IS-IS enabled interface is down.
The IP is set to UP for ISISv6 on interface IP of the IS-ISv6 enabled interface is up.
The IP is set to DOWN for ISISv6 on interface IP of the IS-ISv6 enabled interface is down.
CIRC: Circ Up not processed. Circuit already
up
The interface is already UP; therefore, no
more interface UP requests are processed.
CIRC: Circ Down not processed. Circuit
already Down
The interface is already DOWN; therefore, no
more interface DOWN requests are processed.
CIRC: Join AllIS multicast address error An error occurred while the interface was
joining all the multicast groups.
CIRC: Join ALLL1IS multicast address error An error occurred while the interface was
joining L1 multicast groups.
CIRC: Join ALLL2IS multicast address error An error occurred while the interface joined
L2 multicast groups.
CIRC: Leave ALLL1IS multicast address error An error occurred while the interface was
leaving L1 multicast groups.
CIRC:Leave ALLL2IS multicast address error An error occurred while the interface was
leaving L2 multicast groups.
CIRC: Leave ALLIS multicast address error An error occurred while the interface was
leaving all the multicast groups.
CIRC : circuitName not enabled IS-IS is not enabled on the interface.
circuitName: Interface name
CIRC: Circuit circuitName is on wrong state
while enabling
An error occurred when IS-IS was enabled on
the interface.
circuitName: Interface name
CIRC : circuitName not enabled for Circuit
Type Change
The interface was not enabled with IS-IS when
interface state changed.
circuitName: Interface name