Filter
Top Products
723
Parameter None
Description Use the
reset dhcp server statistics command to clear the statistics of the
DHCP server.
Related command: display dhcp server statistics.
Example # Clear the statistics of the DHCP server.
<Sysname> reset dhcp server statistics
static-bind client-identifier
Syntax static-bind client-identifier client-identifier
undo static-bind client-identifier
View DHCP address pool view
Parameter client-identifier: The client ID of a static binding, a string with 4 to 160 characters
in the format H-H-H..., each H indicates 4 hex digits except the last H indicates 2
or 4 hex digits. For example, aabb-cccc-dd is a valid ID, while aabb-c-dddd and
aabb-cc-dddd are both invalid.
Description Use the static-bind client-identifier command to specify the client ID of a
static binding in a DHCP address pool.
Use the
undo static-bind client-identifier command to remove the client ID
of a static binding from a DHCP address pool.
By default, no client ID is specified.
Note that:
■ Use the static-bind client-identifier command together with the
static-bind ip-address command to accomplish a static binding
configuration.
■ The ID of the static binding of a client must be identical to the ID displayed by
using the display dhcp client verbose command on the client. Otherwise,
the client cannot obtain an IP address.
■ If you use the static-bind client-identifier or static-bind mac-address
command repeatedly, the latest configuration will overwrite the previous one.
Related command: dhcp server ip-pool, static-bind ip-address, static-bind mac-address, and
display dhcp client verbose.
Example # Bind the client ID aaaa-bbbb to the IP address 10.1.1.1 with the mask
255.255.255.0 in DHCP address pool 0.