Filter
Top Products
1571
Description Use the display isis traffic-eng network command to display information
about TE networks for IS-IS.
If no IS-IS level is specified, the TE network information in the IS-IS Level-1-2 area is
displayed.
Example # Display information about TE networks for IS-IS.
<Sysname> display isis traffic-eng network
TE information for ISIS(1)
--------------------------
Level-1 Network Information
---------------------------
DIS Router ID : 89.1.1.1 DIS’s Ip Address : 86.1.1.1
Status In CSPF : ACTIVE Attached Router Count : 2
List of Attached Routers
RouterId : 89.1.1.1 Nbr : 1111.1111.1111.00 Link State : 1
RouterId : 89.2.2.2 Nbr : 1111.1111.1113.00 Link State : 1
Total Number of TE Networks in Level-1 Area: 1, Num Active: 1
Level-2 Network Information
---------------------------
DIS Router ID : 89.1.1.1 DIS’s Ip Address : 86.1.1.1
Status In CSPF : ACTIVE Attached Router Count : 2
List of Attached Routers
RouterId : 89.1.1.1 Nbr : 1111.1111.1111.00 Link State : 1
RouterId : 89.2.2.2 Nbr : 1111.1111.1113.00 Link State : 1
Total Number of TE Networks in Level-2 Area: 1, Num Active: 1
display isis traffic-eng statistics
Syntax display isis traffic-eng statistics [ process-id | vpn-instance vpn-instance-name ]
View Any view
Parameter process-id: IS-IS process ID, in the range 1 to 65535.
Table 391 Description on the fields of the display isis traffic-eng network command
Field Description
Level-1 Network Information Level-1 network information
DIS Router ID DR router ID
DIS’s Ip Address IP address of the DR router
Status In CSPF CSPF state
Attached Router Count Number of attached routers
List of Attached Routers List of attached routers
RouterId Router ID
Nbr Neighbors
Link State Link state
Total Number of TE Networks in Level-1 Area Total number of TE networks in the Level-1
area
Num Active Number of active TE links
Level-2 Network Information Level-2 network information
Total Number of TE Networks in Level-2 Area Total number of TE networks in the Level-2
area