Filter
Top Products
1595
incoming-interface: Displays all tunnels that use the interface identified by the
interface-type interface-number arguments as the incoming interface.
outgoing-interface: Displays all tunnels that use the interface identified by the
interface-type interface-number arguments as the outgoing interface.
interface: Displays all tunnels that use the interface identified by the
interface-type interface-number arguments as the incoming or outgoing interface.
interface-type interface-number: Specifies an interface by its type and number.
verbose: Displays detailed information.
Description Use the
display mpls te tunnel command to display information about MPLS
TE tunnels.
Example # Display information about MPLS TE tunnels. (The output may vary by signaling
protocol.)
<Sysname> display mpls te tunnel
LSP-Id Destination In/Out-If Name
1.1.1.9:1024 3.3.3.9 -/Eth1/0 Tunnel0
1.1.1.9:2048 3.3.3.9 -/Eth1/1 Tunnel0
# Display detailed information about MPLS TE tunnels.
<Sysname> display mpls te tunnel verbose
No : 1
LSP-Id : 1.1.1.9:1024
Tunnel-Name : Tunnel0
Destination : 3.3.3.9
In-Interface : -
Out-Interface : Eth1/0
Tunnel BW : 0 kbps
Class Type : bc0
Ingress LSR-Id : 1.1.1.9
Egress LSR-Id : 3.3.3.9
Setup-Priority : 7
Hold-Priority : 7
Sign-Protocol : RSVP TE
Resv Style : SE
IncludeAnyAff : 0x0
ExcludeAllAff : 0x0
IncludeAllAff : 0x0
Created Time : 2004/10/18 16:05:17
Table 413 Description on the fields of the display mpls te tunnel command
Field Description
LSP-ID LSP ID of tunnel
Destination Destination router ID
In/Out-IF Incoming/outgoing interface
Name Tunnel name configured on the ingress node