Filter
Top Products
1333
Preference = 1, Order = 1
Running Configuration = ip rpf-route-static 10.10.0.0 16 2.2.2.2 order 1
# View the configuration information of multicast static routes in the public
instance.
<Sysname> display multicast routing-table static config
Multicast Routing Table of VPN-Instance: public net
Routes : 1
Mroute 10.10.0.0/16, interface = Ethernet1/0
Matched routing protocol = <none>, Route-policy = <none>
Preference = 1, Order = 1
display multicast rpf-info
Syntax display multicast [ vpn-instance vpn-instance-name | all-instance ] rpf-info
source-address [ group-address ]
View Any view
Parameter vpn-instance-name: VPN instance name, a case sensitive string of up to 31
characters.
all-instance: Specifies all VPN instances.
source-address: Multicast source address.
group-address: Multicast group address, in the range of 224.0.1.0 to
239.255.255.255.
Description Use the
display multicast rpf-info command to view the RPF information of a
multicast source.
Related command: display multicast routing-table and display multicast forwarding-table.
Table 325 Description on the fields of display multicast routing-table static
Field Description
Mroute Multicast route source address and its mask length
Interface Outgoing interface to the multicast source
RPF Neighbor IP address of an RPF neighbor through which the multicast
source is reachable
Matched routing protocol If a protocol is configured, the multicast source address of the
route should be the destination address of an entry in unicast
routing table
Route-policy Routing policy. The multicast source address of the route
should match the routing policy
Preference Route preference
Order Sequence number of the route