Filter
Top Products
2736 CHAPTER 180: VOICE RADIUS CONFIGURATION COMMANDS
gw-access-number
Syntax gw-access-number access-number
undo gw-access-number { access-number | all }
View Voice dial program view
Parameter access-number: Access number (for example, 169 and 17909), a string of up to 31
characters consisting of digits 0 through 9 and the wildcard “.”. The wildcard “.”
represents a digital character and must follow a digit or appear separately.
all: Deletes all access numbers.
Description Use the
gw-access-number command to configure an access number or enter
access number view.
Use the
undo gw-access-number command to delete one or all access
numbers.
By default, no access number is configured.
When you delete all configured access numbers, the voice gateway will give alarm
information, requiring you to make a confirmation. You can press <Y> to delete all
access numbers or press <N> to cancel the operation.
AcctRsp_PstnCaller Accounting_Response message for PSTN caller
AcctRsp_VoipCaller Accounting_Response message for VoIP caller
AcctRsp_PstnCalled Accounting_Response message for PSTN callee
AcctRsp_VoipCalled Accounting_Response message for VoIP callee
Account_Ok Accounting_Ok message
Account_Failure Accounting_Failure message
Cut Cut message
CMC=>VORDS Messages from the CMC module to the voice RADIUS module
Setup Setup message
Alerting Alerting message
Connect Connect message
Release Release message
DtmfInformation DTMF digit
ChannelReady Channel_Ready message
FaxVoiceSwitch Fax_Voice_Switch message
FaxTone Fax_Tone message
Table 703 Description on fields of the display voice radius statistic command
Field Description