Filter
Top Products
1598 CHAPTER 96: MPLS TE CONFIGURATION COMMANDS
Tunnel Desc : Tunnel Interface
Tunnel State Desc : CR-LSP is Up
Tunnel Attributes :
LSP ID : 1.1.1.9:1
Session ID : 0
Admin State : UP Oper State : UP
Ingress LSR ID : 1.1.1.9 Egress LSR ID: 2.2.2.9
Signaling Prot : STATIC-CR Resv Style : -
Class Type : CLASS 0 Tunnel BW : 0
Setup Priority : 7 Hold Priority: 7
Affinity Prop/Mask : 0/0
Explicit Path Name : -
Tie-Breaking Policy : None
Metric Type : None
Record Route : Disabled Record Label : Disabled
FRR Flag : Disabled BackUpBW Flag: Not Supported
BackUpBW Type : - BackUpBW : -
Route Pinning : Disabled
Retry Limit : 5 Retry Interval: 10
Reopt : Disabled Reopt Freq : -
Back Up Type : None
Back Up LSPID : -
Auto BW : Disabled Auto BW Freq : -
Min BW : - Max BW : -
Current Collected BW: -
Interfaces Protected: -
VPN Bind Type : NONE
VPN Bind Value : -
Car Policy : Disabled
Table 417 Description on the fields of display mpls te tunnel-interface command
Field Description
Tunnel Name Tunnel name
Tunnel Desc Tunnel description
Tunnel State Desc Tunnel state description
LSP ID LSP ID
Session ID Session ID
Admin State Administrative state
Oper State Operation state
Ingress LSR ID Ingress LSR ID
Egress LSR ID Egress LSR ID
Signaling Prot Signaling protocol
Resv Style Reservation style
Class Type Service class type
Tunnel BW Tunnel bandwidth
Setup Priority Setup priority of LSP
Hold Priority Hold priority of LSP
Affinity Prop/Mask Affinity attribute and mask
Explicit Path Name Explicit path name
Tie-Breaking Policy Path selection policy
Metric Type Metric type
Record Route State of the route recording function
Record Label State of the label recording function
FRR Flag Fast reroute (FRR) flag