Filter
Top Products
554 CHAPTER 36: BRIDGING CONFIGURATION COMMANDS
promiscuous operation mode, an Ethernet interface forwards all correct
frames, without filtering any MAC address.
■ Bridging is possible only between interfaces in the same bridge set.
As shown above, after being added into bridge set 1, Ethernet1/0 automatically
works in the promiscuous operation mode. When working in the promiscuous
operation mode, an Ethernet interface forwards all correct frames, without
filtering any MAC address.
display bridge address-table
Syntax display bridge address-table [ bridge-set bridge-set | dlsw | interface interface-type
interface-number | mac mac-address ] [ dynamic | static ]
View Any view
Parameters bridge-set: Bridge set number, an integer in the range of 1 to 255.
dlsw: Displays the bridge table information about DLSw.
interface-type interface-number : Specifies an interface by its name and number.
mac-address: MAC address, in the format of H-H-H
dynamic: Displays the information about dynamically learned addresses in the
bridge table.
static: Displays the information about manually configured about addresses in the
bridge table.
Description Use the
display bridge address-table command to view the bridge table
information.
Example # View the information about all the manually configured entries in the bridge
table.
<Sysname> display bridge address-table static
The total of the address-items is 1
Mac-address Set Flag Aging-time Receive Send Interface-name
0000-0001-0001 2 NS 00:02:04 0 0 Ethernet1/0
Flag meaning: P--PERMIT N--DENY D--DYNAMIC S--STATIC
# View the information about a dynamically learned MAC address
1234-5678-1234 in the bridge table.
<Sysname> display bridge address-table mac 1234-5678-1234 dynamic
Mac-address Set Flag Aging-time Receive Send Interface-name
1234-5678-1234 1 PD 00:02:48 36 0 Ethernet1/0
Flag meaning: P--PERMIT N--DENY D--DYNAMIC S--STATIC
Table 90 Description on the fields of the display bridge address-table command
Field Description
Mac-address MAC address