Filter
Top Products
2534 CHAPTER 172: IPX CONFIGURATION COMMANDS
display ipx routing-table protocol
Syntax display ipx routing-table protocol { default | direct | rip | static } [ inactive |
verbose ]
View Any view
Parameter default: Displays default routing information.
direct: Displays direct routing information.
rip: Displays all IPX RIP routing information.
static: Displays all IPX static routing information.
inactive: Displays inactive routing information.
verbose: Displays detailed routing information, including active and inactive
routes.
Description Use the
display ipx routing-table protocol command to display IPX routing
information of the specified route types. Classified active and inactive routes are
displayed if the inactive and verbose keywords are not specified.
Example # Display default IPX routing information.
<Sysname> display ipx routing-table protocol default
Default routing tables:
Summary count: 0
Default routing tables status:<active>:
Summary count: 0
Default routing tables status:<inactive>:
Summary count: 0
display ipx routing-table statistics
Routes Total number of routes
Destination Network ID Destination network ID of the route
Protocol Protocol type of the route
Preference Preference of the route
Ticks Delay time of the route in ticks (a tick is 1/18 second)
Hops Hop value of the route
Nexthop The next hop of the route
Time Aging time of the route: 0 for directly connected routes and
static routes, which do not age.
Interface Address and name of the outbound interface
State State of the route, which could be active or inactive
Table 660 Description on the fields of the display ipx routing-table verbose command
Field Description