Filter
Top Products
1371
encap-data-enable
Syntax encap-data-enable
undo encap-data-enable
View Public instance MSDP view, VPN instance MSDP view
Parameter None
Description Use the
encap-data-enable command to enable register message encapsulation
in SA messages.
Use the
undo encap-data-enable command to disable register message
encapsulation in SA messages.
By default, an SA message contains only an (S, G) entry. No register message is
encapsulated in an SA message.
Example # Enable register message encapsulation in SA messages in the public instance.
<Sysname> system-view
[Sysname] msdp
[Sysname-msdp] encap-data-enable
import-source
Syntax import-source [ acl acl-number ]
undo import-source
View Public instance MSDP view, VPN instance MSDP view
Parameter acl-number: Basic or advanced ACL number, in the range of 2000 to 3999. A basic
ACL is used to filter the multicast sources; while an advanced ACL is used to filter
the multicast sources or multicast groups. If you do not provide this argument in
your command, no multicast source information will be advertised.
n
During ACL matching, the protocol ID in the ACL rule is not checked.
Description Use the
import-source command to configure a rule of creating (S, G) entries.
Use the undo import-source command to remove any rule of creating (S, G)
entries.
By default, when an SA message is created, there are no restrictions on the (S, G)
entries to be advertised in it, namely all the (S, G) entries within the domain are
advertised in the SA message.