Filter
Top Products
2025
display nat server
Syntax display nat server
View Any view
Parameter None
Description Use the
display nat server command to display information about internal
servers.
Example # Display information about internal servers.
<Sysname> display nat server
Server in private network information:
There are currently 1 internal server(s)
Interface: Ethernet1/0, Protocol: 6(tcp),
[global] 202.110.10.10: 8080 [local] 10.110.10.10: 80(www)
display nat session
Syntax display nat session [ vpn-instance vpn-instance-name ] [ source { global
global-address | inside inside-address }] [destination dst-address ]
View Any view
Parameter vpn-instance vpn-instance-name: Displays NAT translation table entries in the
specified MPLS VPN instance. The vpn-instance-name is a string of 1 to 31
characters.
source global global-address: Displays NAT translation table entries for the
specified external source IP address.
source inside inside-address: Displays NAT translation table entries for the
specified internal source IP address.
destination dst-address: Displays NAT translation table entries for the specified
destination IP address.
Description Use the
display nat session command to display the active NAT sessions.
Table 529 Description on the fields of the display nat server command
Field Description
Server in private network information Information about internal servers
Interface:Ethernet1/0, Protocol:6(tcp),
[global] 202.110.10.10: 8080 [local]
10.110.10.10: 80(www)
On interface Ethernet 1/0, a WWW server
is configured. Its internal address and port
number are 10.110.10.10 and 80,
respectively. Its external address and port
number are 202.110.10.10 and 8080,
respectively. The protocol type is TCP.