Filter
Top Products
977
undo ebgp-interface-sensitive
View BGP view/BGP-VPN instance view
Parameters None
Description Use the
ebgp-interface-sensitive command to enable the clearing of EBGP
session on any interface that becomes down.
Use the
undo ebgp-interface-sensitive command to disable the function.
This function is enabled by default.
Examples # In BGP view, enable the clearing of EBGP session on any interface that becomes
down.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ebgp-interface-sensitive
# In BGP-VPN instance view, enable the clearing of EBGP session on any interface
that becomes down (the VPN has been created).
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-vpn1] ebgp-interface-sensitive
filter-policy export (BGP/BGP-VPN instance view)
Syntax filter-policy { acl-number | ip-prefix ip-prefix-name } export [ direct | isis process-id |
ospf process-id | rip process-id | static ]
undo filter-policy export [ direct | isis process-id | ospf process-id | rip process-id |
static ]
View BGP view/BGP-VPN instance view
Parameters acl-number: Number of an ACL used to filter outgoing redistributed routing
information, ranging from 2000 to 3999.
ip-prefix-name: Name of an IP prefix list used to filter outgoing redistributed
routing information, a string of 1 to 19 characters.
direct: Filters direct routes.
isis process-id: Filters outgoing routes redistributed from an ISIS process. The ID is
in the range 1 to 65535.
ospf process-id: Filters outgoing routes redistributed from the OSPF process with
an ID from 1 to 65535.