Filter
Top Products
664 CHAPTER 44: LOGICAL INTERFACE CONFIGURATION COMMANDS
display virtual-access
Syntax display virtual-access [ dialer dialer-number | vt vt-number | user user-name | peer
peer-address | va-number ]*
View Any view
Parameter dialer-number: Dialer interface number, ranging from 0 to 1023.
vt-number: Number of the VT where the virtual access (VA) interface resides. This
argument ranges from 0 to 1023.
user-name: Name of the user accessing through the VA interface. This argument is
a string of 1 character to 80 characters.
peer-address: Peer IP address of the VA interface, in dotted decimal notation.
va-number: Sequence number of the VA interface, ranging from 0 to 128.
Description Use the
display virtual-access command to view the state information about
the VA interfaces.
n
When necessary, the system will automatically create VA interfaces, which will
adopt the parameters defined in a specific VT. You need not create and configure
VA interfaces manually. VA interfaces will be removed due to underlying layer
disconnection or user intervention.
Example # View the state information about all the VA interfaces.
<Sysname> display virtual-access vt 1
Virtual-Template1:0 current state :UP
Line protocol current state :UP
Description : Virtual-Template1:0 Interface
The Maximum Transmit Unit is 1500
Link layer protocol is PPP
LCP opened, MP opened, IPCP opened, OSICP opened
Physical is MP, baudrate: 64000
Output queue : (Urgent queue : Size/Length/Discards) 0/50/0
Output queue : (Protocol queue : Size/Length/Discards) 0/500/0
Output queue : (FIFO queuing : Size/Length/Discards) 0/75/0
Last 300 seconds input: 0 bytes/sec 0 packets/sec
Last 300 seconds output: 0 bytes/sec 0 packets/sec
Bundle name = MFR0 Name of the MFR bundling
Bundle links Physical interface information on each bundled link
Serial1/0, PHY state = up, link
state = up, Link name = Serial1/0
Physical interface of the bundled link, physical state of the
interface, state of the link layer, and the name of the
bundled link (name of the corresponding interface by
default)
Table 120 Description of the fields of the display mfr command
Field Description