Filter
Top Products
1511
Parameters switch-delay: MDT switching delay in seconds, namely the delay time for multicast
traffic to be switched from the share-MDT to the switch-MDT, in the range of 3 to
60.
Description Use the
multicast-domain switch-delay command to configure the MDT
switching delay.
Use the
undo multicast-domain switch-delay command to restore the
system default.
By default, the MDT switching delay time is 5 seconds.
Examples # Set the MDT switching delay to 20 seconds in VPN instance mvpn.
<Sysname> system-view
[Sysname] ip vpn-instance mvpn
[Sysname-vpn-instance-mvpn] multicast-domain switch-delay 20
multicast-domain switch-group-pool
Syntax multicast-domain switch-group-pool switch-group-pool { mask | mask-length }
[ threshold threshold-value | acl acl-number ] *
undo multicast-domain switch-group-pool
View VPN instance view
Parameters switch-group-pool: The start address of the switch-group-pool, in the range of
224.0.1.0 to 239.255.255.255.
mask: Mask for addresses in the switch-group-pool, in the range of
255.255.255.0 to 255.255.255.255, meaning the switch-group-pool contains 1
to 256 group addresses.
mask-length: Mask length for addresses in the switch-group-pool, in the range of
24 to 32, meaning the switch-group-pool contains 1 to 256 group addresses.
threshold-value: Traffic rate threshold that will trigger MDT switching, in units of
kbps. The effective range is 0 to 4194304.
acl-number: Advanced ACL number, in the range of 3000 to 3999. An advanced
ACL is used to define the (S, G) entry or entries to which the configured MDT
switching condition will apply. If you do not specify an ACL, the configured MDT
switching condition will apply to all (S, G) entries.
Description Use the
multicast-domain switch-group-pool command to configure the
address range of the switch-group-pool and the switching condition.
Use the
undo multicast-domain switch-group-pool command to restore the
system default.