Filter
Top Products
399
interface mfr
Syntax interface mfr { interface-number | interface-number.subnumber }
undo interface mfr { interface-number | interface-number.subnumber }
View System view
Parameter interface-number: MFR interface number, in the range 0 to 1023.
interface-number.subnumber: MFR subinterface number, of which,
interface-number is the main interface number, and subnumber is subinterface
number. The subnumber argument ranges from 0 to 1023.
Description Use the
interface mfr command to create a multilink frame relay bundle
interface or subinterface and enter the corresponding interface view.
Use the
undo interface mfr command to delete a specified multilink frame relay
bundle interface or subinterface.
By default, there is no multilink frame relay interface or subinterface.
Before an MFR subinterface is created, the MFR interface must be created first.
Before using the undo interface mfr command to delete an MFR interface, you
must delete all physical interfaces from the MFR interface.
For MFR interface, if there is one bundle link is in up state, the MFR physical state
is up. Moreover, all bundle links should be tagged as down before the bundle is
down. The link layer protocol on MFR interface is determined by LMI packet
negotiation.
Example # Create a multilink frame relay bundle interface MFR4 with a point-to-multipoint
subinterface.
<Sysname> system-view
[Sysname] interface mfr 4
[Sysname-MFR4] quit
[Sysname] interface mfr 4.1
[Sysname-MFR4.1]
interface serial
Syntax interface serial interface-number.subnumber [ p2p | p2mp ]
undo interface serial interface-number.subnumber
View System view
Parameter interface-number: Main interface number.