Filter
Top Products
1114 CHAPTER 76: OSPF CONFIGURATION COMMANDS
Parameters process-id: OSPF process ID, in the range 1 to 65535.
Description Use the
display ospf abr-asbr command to display information about
ABR/ASBR.
If no process is specified, ABR/ASBR information of all OSPF processes is displayed.
If you use this command on routers in a stub area, no ASBR information is
displayed.
Examples # Display information about ABR/ASBR.
<Sysname> display ospf abr-asbr
OSPF Process 1 with Router ID 192.168.1.2
Routing Table to ABR and ASBR
Type Destination Area Cost Nexthop RtType
Inter 3.3.3.3 0.0.0.0 3124 10.1.1.2 ASBR
Intra 2.2.2.2 0.0.0.0 1562 10.1.1.2 ABR
display ospf asbr-summary
Syntax display ospf [ process-id ] asbr-summary [ ip-address { mask | mask-length }]
View Any view
Parameters process-id: OSPF process ID, in the range 1 to 65535.
ip-address: Matched IP address, in dotted decimal format.
mask: IP address mask, in dotted decimal format.
mask-length: Mask length, in the range 0 to 32 bits.
Description Use the
display ospf asbr-summary command to display information about
the redistributed routes that are summarized.
If no OSPF process is specified, related information of all OSPF processes is
displayed.
If no IP address is specified, information about all summarized redistributed routes
will be displayed.
Table 262 Description on the fields of the display ospf abr-asbr command
Field Description
Type Intra-area router or Inter-area router
Destination Router ID of an ABR/ASBR
Area ID of the area of the next hop
Cost Cost from the router to the ABR/ASBR
Nexthop Next hop address
RtType Router type: ABR, ASBR