Filter
Top Products
2693
Description Use the gk-client command to enter gatekeeper client view to configure voice
and gatekeeper parameters.
Use the
quit command to exit this view.
Related command: area-id, gk-2nd-id, gk-id, gw-address, gw-id, and ras-on.
Example # Enter gatekeeper client view.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] gk-client
[Sysname-voice-gk]
gk-2nd-id
Syntax gk-2nd-id gk-name gk-addr gk-ipaddress [ ras-port ]
undo gk-2nd-id
View Gatekeeper client view
Parameter gk-name: Gatekeeper name, a string of 1 to 128 case sensitive characters.
gk-ipaddress: IP address of gatekeeper.
ras-port: RAS port used by the gatekeeper, an integer in the range 1 to 65535. The
default is 1719.
Description Use the
gk-2nd-id command to configure the secondary gatekeeper for the
gateway.
Use the
undo gk-2nd-id command to remove the secondary gatekeeper.
By default, no secondary gatekeeper is specified for the gateway.
For reliability sake, a backup mechanism is provided for gatekeepers. In case the
communication with a primary gatekeeper is abnormal (for example, timeout
occurs) or the primary gatekeeper becomes unavailable, gateways can turn to a
secondary gatekeeper for registration.
n
Before you can configure a secondary gatekeeper, you must first configure a
primary gatekeeper with the gk-id command.
Related command: gk-id.
Example # Configure a secondary gatekeeper, setting its IP address to 1.1.1.2, name to
gk-backup, and RAS port to the default.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] gk-client