Filter
Top Products
1153
route-policy-name: Rout policy name, a string of 1 to 19 characters.
value: Priority value, in the range 1 to 255. A smaller value has a higher priority.
Description Use the
preference command to set the priority of OSPF routes.
Use the
undo preference command to restore the default.
The priority of OSPF internal routes defaults to 10, and the priority of OSPF
external routes defaults to 150.
If a routing policy is specified, priorities defined by the routing policy will apply to
matched routes, and the priorities set with the preference command apply to
OSPF routes not matching the routing policy.
A router may run multiple routing protocols. When several routing protocols find
routes to the same destination, the router uses the route found by the protocol
with the highest priority.
Examples # Set a priority of 150 for OSPF internal routes.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] preference 150
reset ospf counters
Syntax reset ospf [ process-id ] counters [ neighbor [ interface-type interface-number ]
[ router-id ]]
View User view
Parameters process-id: OSPF process ID, in the range 1 to 65535.
neighbor: Clears neighbor statistics on an interface.
interface-type interface-number: Interface type and interface number.
router-id: Neighbor router ID.
Description Use the
reset ospf counters command to reset OSPF counters. If no OSPF
process is specified, counters of all OSPF processes are reset.
Examples # Clear OSPF counters.
<Sysname> reset ospf counters
reset ospf process
Syntax reset ospf [ process-id ] process