Filter
Top Products
2532 CHAPTER 172: IPX CONFIGURATION COMMANDS
display ipx routing-table
Syntax display ipx routing-table [ network ]
View Any view
Parameter Network: Displays active routing information for the network.
Description Use the
display ipx routing-table command to display active IPX routing
information.
If no network is specified, all active routes are displayed.
Example # Display all active IPX routes.
<Sysname> display ipx routing-table
Routing tables:
Summary count: 1
Dest_Ntwk_ID Proto Pre Ticks Hops Nexthop Interface
0x1 Direct 0 1 0 0.0000-0000-0000 Ethernt1/1
Update change only is disabled The triggered update feature is disabled.
Forwarding of IPX type 20 propagation packet is
disabled
Forwarding of IPX type 20 propagation
packet is disabled.
Delay of this IPX interface Delay value of the current interface in ticks
(a tick is 1/18 second).
SAP GNS response is enabled/disabled Whether the interface is enabled to
respond to SAP GNS requests.
RIP packet maximum size Maximum size of RIP updating packet on
the current interface.
SAP packet maximum size Maximum size of SAP updating packet on
the current interface.
0 received IPX packets received on the interface
2 sent IPX packets sent on the interface
0 bytes received IPX packet bytes received on the interface
74 bytes sent IPX packet bytes sent on the interface
0 RIP received, 1 RIP sent, 0 RIP discarded IPX RIP packets received, sent, discarded
0 RIP specific requests received, 0 RIP specific
responses sent
IPX RIP specific requests received,
responses sent
0 RIP general requests received, 0 RIP general
responses sent
IPX RIP general requests received,
responses sent
0 SAP received, 0 SAP sent, 0 SAP discarded Received, sent, discarded IPX SAP packets
0 SAP requests received, 0 SAP responses sent Received IPX SAP packets, sent IPX SAP
responses
IPX encapsulation The IPX encapsulation format on the
current interface
Table 658 Description on the fields of the display ipx interface command
Field Description