Filter
Top Products
2551
Parameter network.node: Destination address. The argument network is an eight-bit
hexadecimal number ranging from 0x1 to 0xFFFFFFFD. The argument node is a
48-bit value represented by a triplet of four-digit hexadecimal numbers separated
by “-”. The 0s in front can be omitted when inputting.
-c count: Number of ping packets to be sent. By default, the value is 5. This value
ranges from 1 to 4,294,967,295.
-t timeout: Timeout interval of ping packets in milliseconds. By default, the value is
2 milliseconds. This value ranges from 0 to 65,535.
-s size: Ping packet size, in bytes. By default, the value is 100 bytes. This value
ranges from 44 to 1,500.
Description Use the
ping ipx command to check host reachability and network connectivity
in an IPX network.
Example # Ping the destination address at 675.0000-a0b0-fefe.
<Sysname> ping ipx 675.0000-a0b0-fefe
reset ipx statistics
Syntax reset ipx statistics
View User view
Parameter None
Description Use the
reset ipx statistics command to clear IPX statistics.
Example # Clear IPX statistics.
<Sysname> reset ipx statistics
reset ipx routing-table statistics protocol
Syntax reset ipx routing-table statistics protocol [ all | default | direct | rip | static ]
View User view
Parameter all: Clears the statistics of IPX routes of all types.
default: Clears the statistics of the default IPX route.
direct: Clears the statistics of the direct IPX routes.
rip: Clears the statistics of the IPX RIP routes.
static: Clears the statistics of the static IPX routes.