Filter
Top Products
944 CHAPTER 71: IP ROUTING TABLE COMMANDS
Summary Count : 2
Destination : ::1/128 Protocol : Direct
NextHop : ::1 Preference : 0
Interface : InLoop0 Cost : 0
Destination : 1:1::/64 Protocol : Static
NextHop : :: Preference : 60
Interface : NULL0 Cost : 0
Refer to Table 209 for description about the above output.
display ipv6 routing-table ipv6-address
Syntax display ipv6 routing-table ipv6-address prefix-length [ longer-match ] [ verbose ]
View Any view
Parameters ipv6-address: Destination IPv6 address.
prefix-length: Prefix length, in the range 0 to 128.
longer-match: Displays the matched route having the longest prefix length.
verbose: Displays both active and inactive verbose routing information. Without
this keyword, only brief active routing information is displayed.
Description Use the
display ipv6 routing-table ipv6-address command to display routing
information about the specified destination IPv6 address.
Executing the command with different parameters yields different output:
■ display ipv6 routing-table ipv6-address prefix-length
The system ANDs the input destination IPv6 address with the input prefix length,
and ANDs the destination IPv6 address in each route entry with the input prefix
length.
If the two operations yield the same result for an entry and the entry is active with
a prefix length less than or equal to the input prefix length, the entry is displayed.
Only route entries that exactly match the input destination address and prefix
length are displayed.
■ display ipv6 routing-table ipv6-address prefix-length longer-match
The system ANDs the input destination IPv6 address with the input prefix length,
and ANDs the destination IPv6 address in each route entry with the input prefix
length.
If the two operations yield the same result for multiple entries with a prefix length
less than or equal to the input prefix length, the one that is active with the longest
prefix length is displayed.