Filter
Top Products
1702 CHAPTER 98: MPLS L3VPN CONFIGURATION COMMANDS
[Sysname-bgp] ipv4-family vpnv4
[Sysname-bgp-af-vpnv4] peer 1.1.1.1 group test
# In BGP-L2VPN address family view, add peer 1.1.1.1 into peer group test.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] group test external
[Sysname-bgp] l2vpn-family
[Sysname-bgp-af-l2vpn] peer 1.1.1.1 group test
peer ip-prefix (BGP-VPNv4 subaddress family view)
Syntax peer { group-name | ip-address } ip-prefix prefix-name { export | import }
undo peer { group-name | ip-address } ip-prefix prefix-name { export | import }
View BGP-VPNv4 subaddress family view
Parameter group-name: Name of the peer group, a string of 1 to 47 characters.
ip-address: IP address of the peer.
prefix-name: Name of the IP prefix list, a string of 1 to 19 characters.
export: Filters the routes to be advertised.
import: Filters the received routes.
Description Use the
peer ip-prefix command to apply a route filtering policy based on IP
prefix list to a peer or peer group.
Use the
undo peer ip-prefix command to remove the configuration.
By default, no route filtering policy based on IP prefix list is applied to a peer or
peer group.
Example # In BGP-VPNv4 subaddress family view, specify to filter the received routes of a
peer group using IP prefix list list1.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpnv4
[Sysname-bgp-af-vpnv4] peer group1 ip-prefix list1 import
peer label-route-capability (BGP view/BGP VPN instance view)
Syntax peer { group-name | ip-address } label-route-capability
undo peer { group-name | ip-address } label-route-capability