Filter
Top Products
2630 CHAPTER 174: DIAL PLAN CONFIGURATION COMMANDS
max-number: Maximum number of call connections in a
maximum-call-connection set, in the range of 1 to 120.
all: Specifies all the maximum-call-connection sets.
Description Use the
max-call command to configure maximum-call-connection sets.
Use the undo max-call command to remove the specified
maximum-call-connection set or all maximum-call sets.
By default, no maximum-call-connection sets are configured.
Together with the max-call command in voice entity view, this command is used
to limit the maximum number of call connections of a voice entity or a set of voice
entities.
Related command: max-call (in voice entity view).
Example # Set the maximum number of call connections in maximum-call-connection set 1
to 5.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] max-call 1 5
max-call (in voice entity view)
Syntax max-call set-number
undo max-call
View POTS/VoIP/VoFR voice entity view
Parameter set-number: Number identifying a maximum-call-connection set (number of the
maximum-call-connection set configured in voice dial program view), in the range
of 1 to 2147483647.
Description Use the
max-call command to bind a voice entity to the
maximum-call-connection set specified by the set-number argument.
Use the
undo max-call command to remove the binding. Although you can bind
each voice entity to only one maximum-call-connection set, you can change the
binding.
By default, no maximum-call-connection set is bound, that is, there is no limitation
on the number of call connections.
This command is used together with the max-call command in voice dial program
view. The former is used to bind a voice entity to a maximum-call-connection set,