Filter
Top Products
1656 CHAPTER 97: MPLS L2VPN CONFIGURATION COMMANDS
Transport Client VC Local Remote Tunnel
VC ID Intf State VC Label VC Label Policy
5 Serial2/0 down 0 0 lsp3
6 Serial2/1 down 0 0 lsp2
7 Serial2/2 down 0 0 plcy3
# Display information about all Martini VCs configured on interface Ethernet 1/0.
<Sysname> display mpls l2vc interface ethernet 1/0
***VC ID : 10000000
VC State : up
Destination : 1.1.1.1
Client Intf : Ethernet1/0 is up
Local Group ID : 0
Remote Group ID : 0
Local VC Label : 1029
Remote VC Label : 1029
Tunnel Policy : default
Tunnel Type : lsp
Tunnel ID : 0x220020
# Display information about Martini VCs received from the remote peer.
<Sysname> display mpls l2vc remote-info
total remote ldp vc : 1
Transport Group Peer Remote Remote C Remote
Table 429 Description on the fields of the display mpls l2vc command
Field Description
total ldp vc Total number of Martini VCs
Transport VC ID Remote VC ID
Client Intf Interface connected with the CE
VC State Status of the VC
Local VC Label Local VC label
Remote VC Label Remote VC label
Tunnel Policy Tunnel policy configured
Table 430 Description on the fields of the display mpls l2vc interface command
Field Description
VC ID Remote VC ID
VC State Status of the VC
Destination Destination IP address
Client Intf Interface connected with the CE
Local Group ID Local VC group ID, used for the L2VPN VC FEC TLV field of LDP
messages
Remote Group ID Remote VC group ID, used for the L2VPN VC FEC TLV field of LDP
messages
Local VC Label Local VC label
Remote VC Label Remote VC label
Tunnel Policy Tunnel policy configured
Tunnel Type Type of the tunnel
Tunnel ID ID of the tunnel