Filter
Top Products
24
GVRP CONFIGURATION COMMANDS
display gvrp statistics
Syntax display gvrp statistics [ interface interface-list ]
View Any view
Parameter interface interface-list: Specifies an Ethernet port list, in the format of
{ interface-type interface-number [ to interface-type interface-number ] }&<1-10>,
where &<1-10> indicates that you can specify up to 10 port ranges. A port range
defined without the to interface-type interface-number portion comprises only
one port.
Description Use the
display gvrp statistics command to display GVRP statistics of the
specified or all trunk ports.
Note that if the interface interface-list is not provided, the GVRP statistics of all
trunk ports will be displayed. Otherwise, only the GVRP statistics of all the
specified trunk port will be displayed.
Example # Display statistics about GVRP for trunk port Ethernet 1/0.
<Sysname> display gvrp statistics interface ethernet 1/0
GVRP statistics on port Ethernet1/0
GVRP Status : Enabled
GVRP Running : YES
GVRP Failed Registrations : 0
GVRP Last Pdu Origin : 0000-0000-0000
GVRP Registration Type : Normal
Table 54 Description on the fields of the display gvrp statistics command
Field Description
GVRP Status Indicates whether GVRP is enabled or disabled.
GVRP Running Indicates whether GVRP is running.
GVRP Failed Registrations Indicates the number of GVRP registration failures.
GVRP Last Pdu Origin Indicates the source MAC address in the last GVRP PDU.
GVRP Registration Type Indicates the GVRP registration type on the port.