Filter
Top Products
1660 CHAPTER 97: MPLS L2VPN CONFIGURATION COMMANDS
If you do not specify any argument, the command displays information about all
Kompella L2VPN connections.
Example # Display information about all Kompella L2VPN connections.
<Sysname> display mpls l2vpn connection
1 total connections,
connections: 1 up, 0 down, 0 local, 1 remote, 0 unknown
VPN name: vpn1,
1 total connections,
connections: 1 up, 0 down, 0 local, 1 remote, 0 unknown
CE name: ce1, id: 1,
Rid type status peer-id route-distinguisher intf
4 rmt up 3.3.3.9 100:1 Serial2/0
# Display information about Kompella L2VPN connections for VPN vpn1.
<Sysname> display mpls l2vpn connection vpn-name vpn1
VPN name: vpn1,
1 total connections,
connections: 1 up, 0 down, 0 local, 1 remote, 0 unknown
CE name: ce1, id: 1,
Rid type status peer-id route-distinguisher intf
4 rmt up 3.3.3.9 100:1 Serial2/0
For descriptions of the output fields of the command, see Table 437.
# Display information about Kompella L2VPN connections on interface Serial 2/0.
<Sysname> display mpls l2vpn connection interface Serial 2/0
***Conn-type : remote
Local vc state : up
Remote vc state : up
Local ce-id : 1
Local ce name : ce1
Remote ce-id : 4
Intf(state,encap) : Serial2/0 (up,ppp)
Peer id : 3.3.3.9
Route-distinguisher : 100:1
Table 437 Description on the fields of the display mpls l2vpn connection command
Field Description
connections Statistics about connections, including the number of connections in
the state of Up, the number of connections in the state of Down, the
number of local connections, the number of remote connections, and
the number of unknown connections
VPN name Name of the VPN
CE name Name of the CE
id ID of the CE
Rid ID of the remote CE
type Type of the connection
status Status of the connection
peer-id IP address of the peer
route-distinguisher RD
intf Interface for the connection