Filter
Top Products
1487
Example # Set the IPv6 PIM neighbor timeout time to 120 seconds on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] pim ipv6 hello-option holdtime 120
pim ipv6 hello-option lan-delay
Syntax pim ipv6 hello-option lan-delay interval
undo pim ipv6 hello-option lan-delay
View Interface view
Parameter interval: Prune delay in milliseconds, with an effective range of 1 to 32,767.
Description Use the
pim ipv6 hello-option lan-delay command to configure the prune
delay time on the current interface.
Use the
undo pim ipv6 hello-option lan-delay command to restore the
default setting.
By default, the prune delay to 500 milliseconds.
Related command: pim ipv6 hello-option override-interval, hello-option override-interval
(IPv6 PIM view), and hello-option lan-delay (IPv6 PIM view).
Example # Set the prune delay time to 200 milliseconds on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] pim ipv6 hello-option lan-delay 200
pim ipv6 hello-option neighbor-tracking
Syntax pim ipv6 hello-option neighbor-tracking
undo pim ipv6 hello-option neighbor-tracking
View Interface view
Parameter None
Description Use the
pim ipv6 hello-option neighbor-tracking command to disable join
suppression, namely enable neighbor tracking, on the current interface.
Use the
undo pim ipv6 hello-option neighbor-tracking command to enable
join suppression.
By default, join suppression is enabled, namely neighbor tracking is disabled.