Filter
Top Products
1647
View MPLS L2VPN view/MPLS L2VPN CE view
Parameter ce-name: Unique name for a CE in the current VPN of the current PE, a string of 1
to 20 characters that cannot include the character of “-”.
ce-id: ID for the CE in the VPN. For MSR20 series routers, it is in the range of 0 to
199; for MSR30 and MSR50 series routers, it is in the range 0 to 249.
ce-range: Maximum number of CEs that the current PE can support. For MSR20
series routers, it is in the range of 1 to 200; for MSR30 and MSR50 series routers,
it is in the range 1 to 250. The default is 10.
ce-offset: Original CE offset. It can be either 0 or 1. The default is 0.
Description Use the
ce command in MPLS L2VPN view to create a CE and enter MPLS L2VPN
CE view.
Use the
ce command in MPLS L2VPN CE view to create another CE.
Use the undo ce command to delete a CE.
Example # Create a CE named ce1 for a VPN.
<Sysname> system-view
[Sysname] mpls l2vpn vpn1 encapsulation ethernet
[Sysname-mpls-l2vpn-vpn1] route-distinguisher 100:1
[Sysname-mpls-l2vpn-vpn1] ce ce1 id 1
[Sysname-mpls-l2vpn-ce-vpn1-ce1]
# Create a CE named ce2 for a VPN.
<Sysname> system-view
[Sysname] mpls l2vpn vpn1 encapsulation ethernet
[Sysname-mpls-l2vpn-vpn1] route-distinguisher 100:1
[Sysname-mpls-l2vpn-vpn1] ce ce1 id 1
[Sysname-mpls-l2vpn-ce-vpn1-ce1] ce ce1 id 2
[Sysname-mpls-l2vpn-ce-vpn1-ce2]
connection
Syntax connection [ ce-offset id ] interface interface-type interface-number [ tunnel-policy
tunnel-policy-name ]
undo connection { ce-offset id | interface interface-type interface-number }
View MPLS L2VPN CE view
Parameter id: ID of the peer CE of the L2VPN connection. For MSR20 series routers, it is in the
range of 0 to 199; for MSR30 and MSR50 series routers, it is in the range 0 to 249.
interface-type interface-number: Specifies the interface connecting the CE by its
type and number. The encapsulation type must be same as that of the VPN.