Filter
Top Products
2549
hop hop-count: Number of hops to reach the server, ranging from 1 to 15. Note
that hop count more than or equal to 16 implies the service is unreachable.
preference preference: Preference of service information, ranging from 1 to 255.
The smaller the value, the higher the preference. By default, the preference of the
static service information items is 60 and is configurable, and the preference of the
dynamic items is 500 and cannot be configured.
all: Deletes all static service information items.
Description Use the
ipx service command to add an IPX static service information item.
Use the
undo ipx service command to delete an IPX static service information
item.
Example # Add a static service information item with the service type being 4, service name
“FileServer”, server network ID 130, node value 0000-0a0b-abcd, server hop 1
and server preference 60.
<Sysname> system-view
[Sysname] ipx service 4 FileServer 130.0000-0a0b-abcd 451 hop 1 preference 60
ipx split-horizon
Syntax ipx split-horizon
undo ipx split-horizon
View Interface view
Parameter None
Description Use the
ipx split-horizon command to enable split horizon on the current
interface.
Use the
undo ipx split-horizon command to disable split horizon on the current
interface.
By default, split horizon is enabled on the interface.
Example # Enable split horizon on the interface Ethernet1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] ipx split-horizon
ipx tick
Syntax ipx tick ticks
undo ipx tick