Filter
Top Products
2439
info-center monitor channel
Syntax info-center monitor channel { channel-number | channel-name }
undo info-center monitor channel
View System view
Parameter channel-number: Specifies a channel number, in the range 0 to 9.
channel-name: Specifies a channel name, which could be a default name or one
that is defined by the user. The user needs to specify a channel name first before
using it as a self-defined channel name. For more information, refer to
“info-center channel name” on page 2432.
Description Use the
info-center monitor channel command to configure the channel to
output system information to the monitor.
Use the
undo info-center monitor channel command to restore the default
channel to output system information to the monitor.
By default, output of system information to the monitor is enabled with a default
channel name of monitor and a default channel number of 1.
Note that the info-center monitor channel command takes effect only after the
information center is enabled with the info-center enable command.
Example # Set to output system information to the monitor through channel 0.
<Sysname> system-view
[Sysname] info-center monitor channel 0
info-center snmp channel
Syntax info-center snmp channel { channel-number | channel-name }
undo info-center snmp channel
View System view
Parameter channel-number: Specifies a channel number, in the range 0 to 9.
channel-name: Specifies a channel name, which could be a default name or one
that is defined by the user. The user needs to specify a channel name first before
using it as a self-defined channel name. For more information, refer to
“info-center channel name” on page 2432.
Description Use the
info-center snmp channel command to configure the channel to
output system information to the SNMP NMS.