Filter
Top Products
2478 CHAPTER 165: MAC ADDRESS TABLE MANAGEMENT CONFIGURATION COMMANDS
<Sysname> display mac-address 00e0-fc01-0101
MAC ADDR VLAN ID STATE PORT INDEX AGING TIME(s)
00e0-fc01-0101 1 Learned GigabitEthernet1/0 AGING
display mac-address aging-time
Syntax display mac-address aging-time
View Any view
Parameter None
Description Use the
display mac-address aging-time command to display the aging time
of dynamic entries in the MAC address table.
Related commands: mac-address (system view), mac-address (Ethernet interface view),
mac-address timer, display mac-address.
Example # Display the aging time of dynamic entries in the MAC address table.
<Sysname> display mac-address aging-time
Mac address aging time: 300s
The above information indicates that the aging time of dynamic entries in the
MAC address table is 300 seconds.
display mac-address mac-learning
Syntax display mac-address mac-learning [ interface-type interface-number ]
View Any view
Parameter interface-type interface-number: Specifies an interface by its type and number.
The MAC address learning status of the specified interface will be displayed.
Table 637 Description on the fields of the display mac-address command
Field Description
MAC ADDR MAC address
VLAN ID ID of the VLAN to which the MAC address belongs
STATE State of a MAC address, which could be Config static, Config dynamic,
Learned and Blackhole.
PORT INDEX Port name (Displayed as N/A for a blackhole MAC address)
AGING TIME(s) Aging time, which could be:
AGING, indicates that the entry is aging.
NOAGED, indicates that the entry does not age.