Filter
Top Products
2019
Example # Display connection-limit statistics.
<Sysname> display connection-limit statistics
source-ip dest-ip dest-port vpn-instance
192.168.0.210 --- --- ---
--------------------------------------------------------------------------
NAT amount upper-limit lower-limit limit-flag
2 200 100 0
source-ip dest-ip dest-port vpn-instance
192.168.0.210 --- --- ---
--------------------------------------------------------------------------
NAT amount upper-limit lower-limit limit-flag
250200
display nat address-group
Syntax display nat address-group
View Any view
Parameter None
Description Use the
display nat address-group command to display the NAT address pool
information.
Example # Display the NAT address pool information.
<Sysname> display nat address-group
NAT address-group information:
There are currently 1 nat address-group(s)
1 : from 202.110.10.10 to 202.110.10.15
Table 522 Description on the fields of the display connection-limit statistics command
Field Description
source-ip Source IP address
dest-ip Destination IP address
dest-port Destination port number
vpn-instance Name of the MPLS VPN instance that a connection belongs to
amount Number of connections allowed to establish
upper-limit Upper limit of connections
lower-limit Lower limit of connections
limit-flag Whether new connections are allowed, 0 means yes, 1 means no
Table 523 Description on the fields of the display nat address-group command
Field Description
NAT address-group information NAT address pool information
There are currently 1 nat address-group(s) There is one NAT address group
1 : from 202.110.10.10 to 202.110.10.15 The range of IP addresses in address pool 1
is from 202.110.10.10 to 202.110.10.15