Filter
Top Products
23
GARP CONFIGURATION COMMANDS
display garp statistics
Syntax display garp statistics [ interface interface-list ]
View Any view
Parameter interface interface-list: Specifies an Ethernet port list, in the format of
{ interface-type interface-number [ to interface-type interface-number ] }&<1-10>,
where &<1-10> indicates that you can specify up to 10 port ranges. A port range
defined without the to interface-type interface-number portion comprises only
one port.
Description Use the
display garp statistics command to display the GARP statistics of the
specified or all ports.
Note that:
■ If the interface interface-list keyword-argument combination is not specified,
this command displays the GARP statistics of all the ports.
■ If the interface interface-list keyword-argument combination is specified, this
command displays the GARP statistics of the specified ports.
Example # Display statistics about GARP for port Ethernet 1/0.
<Sysname> display garp statistics interface ethernet1/0
GARP statistics on port Ethernet1/0
Number of GVRP Frames Received : 0
Number of GVRP Frames Transmitted : 0
Number of Frames Discarded : 0
display garp timer
Syntax display garp timer [ interface interface-list ]
View Any view
Parameter interface interface-list: Specifies an Ethernet port list, in the format of
{ interface-type interface-number [ to interface-type interface-number ] }&<1-10>,
where &<1-10> indicates that you can specify up to 10 port ranges. A port range