Filter
Top Products
1453
mld send-router-alert
Syntax mld send-router-alert
undo mld send-router-alert
View Interface view
Parameter None
Description Use the
mld send-router-alert command to enable insertion of the Router-Alert
option into MLD messages to be sent from the current interface.
Use the
undo mld send-router-alert command to disable insertion of the
Router-Alert option into MLD messages to be sent from the current interface.
By default, MLD messages carry the Router-Alert option.
Related command: send-router-alert (MLD view) and mld require-router-alert.
Example # Disable insertion of the Router-Alert option into MLD messages to be sent from
Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] undo mld send-router-alert
mld static-group
Syntax mld static-group ipv6-group-address [ source ipv6-source-address ]
undo mld static-group { all | ipv6-group-address [ source ipv6-source-address ]}
View Interface view
Parameter all: Removes all static IPv6 multicast groups that the current interface has joined.
ipv6-group-address: IPv6 multicast group address, in the range of FFxy::/16
(excluding FFx0::/16, FFx1::/16, FFx2::/16, and FF0y), where x and y represent any
hexadecimal number ranging from 0 to F.
ipv6-source-address: IPv6 address of the specified multicast source.
Description Use the
mld static-group command to configure the current interface to be a
statically-connected member of the specified IPv6 multicast group.
Use the
undo mld static-group command to remove the configuration.
By default, an interface is not a statically-connected member of any IPv6 multicast
group.