Filter
Top Products
1263
View User view
Parameters ipv4-address: Soft-resets the connection with an IPv4 BGP peer.
ipv6-address: Soft-resets the connection with an IPv6 BGP peer.
all: Soft-resets all IPv6 BGP connections.
external: Soft-resets EBGP connections.
group ipv6-group-name: Soft-resets connections with a peer group. The name of
the peer group is a string of 1 to 47 characters.
internal: Soft-resets IBGP connections.
export: Performs soft reset in outbound direction.
import: Performs soft reset in inbound direction.
Description Use the refresh bgp ipv6 command to soft reset specified IPv4/IPv6 BGP
connections. With this feature, you can refresh the IPv4/IPv6 BGP routing table
and apply a new available policy without tearing down IPv4/IPv6 BGP connections.
To perform IPv4/IPv6 BGP soft reset, all routers in the network should support
route-refresh. If a router not supporting route refresh exists in the network, you
need to use the peer keep-all-routes command on the local router to save all
route updates before performing soft reset.
Examples # Soft reset inbound IPv6 BGP connections.
<Sysname> refresh bgp ipv6 all import
reset bgp ipv6
Syntax reset bgp ipv6 { as-number | ipv4-address | ipv6-address [ flap-info ] | all | group
group-name | external | internal }
View User view
Parameters as-number: Resets the IPv6 BGP connections to peers in the specified AS.
ipv4-address: Resets the connection to the specified IPv4 BGP peer.
ipv6-address: Resets the connection to the specified IPv6 BGP peer.
flap-info: Clears the history information of routing flaps.
all: Resets all IPv6 BGP connections.
group group-name: Resets the connections to the specified IPv6 BGP peer group.
external: Resets all the EBGP connections.