Filter
Top Products
1031
receive: Enables/disables the debugging for received BGP labeled route update
packets.
send: Enables/disables the debugging for sent BGP labeled route update packets.
verbose: Displays detailed debugging information.
Description Use the debugging bgp update label-route command to enable debugging
for BGP labeled route update messages.
Use the
undo debugging bgp update label-route command to disable
debugging for BGP labeled route update messages.
By default, this debugging is disabled.
Enabling debugging may affect system performance; therefore, use this command
only when necessary and disable debugging once the debugging operation is
complete.
Examples # Device A and Device B have established a BGP peer relationship and MPLS has
been enabled on the connected interfaces. Enable debugging for BGP labeled
route update messages.
<Sysname> debugging bgp update route-label
*Sep 4 16:14:32:16 2006 Sysname RM/6/RMDEBUG:
BGP.: Send UPDATE to peer 2.2.2.2 for following destinations :
*Sep 4 16:14:32:16 2006 Sysname RM/6/RMDEBUG:
Origin : Incomplete
AS Path :
Next Hop : 1.1.1.1
Local Pref : 100
MED : 0
111.1.1.1/32 (1024)
*Sep 4 16:14:32:22 2006 Sysname RM/6/RMDEBUG:
BGP_L3VPN.: Recv UPDATE from 2.2.2.2 with following destinations :
Update message length : 76
Local Pref : 100
MED : 0
Origin : Incomplete
AS Path :
Next Hop : 2.2.2.2
111.2.2.2/32 (1025)
// Update message information of L3VPN labeled routes
*Sep 4 16:17:20:642 2006 Sysname RM/6/RMDEBUG:
BGP.: Send UPDATE to 100::2 for following destinations :
Origin : Incomplete
AS Path :
Next Hop : 100::1
Local Pref : 100
MED : 0
100::/64(1025),
*Sep 4 16:17:20:708 2006 Sysname RM/6/RMDEBUG:
BGP_IPV6.: Recv UPDATE from peer 100::2 with following destinations :
Update message length : 86